commit a60b5affa8130e8f635039cfaf46c834895d0514 Author: job Date: Thu May 23 20:18:17 2024 +0000 initial commit diff --git a/opendkim.conf b/opendkim.conf new file mode 100644 index 0000000..ea4a450 --- /dev/null +++ b/opendkim.conf @@ -0,0 +1,51 @@ +# This is a basic configuration for signing and verifying. It can easily be +# adapted to suit a basic installation. See opendkim.conf(5) and +# /usr/share/doc/opendkim/examples/opendkim.conf.sample for complete +# documentation of available configuration parameters. + +Syslog yes +SyslogSuccess yes +#LogWhy no + +# Common signing and verification parameters. In Debian, the "From" header is +# oversigned, because it is often the identity key used by reputation systems +# and thus somewhat security sensitive. +Canonicalization relaxed/simple +#Mode sv +#SubDomains no +OversignHeaders From + +# Signing domain, selector, and key (required). For example, perform signing +# for domain "example.com" with selector "2020" (2020._domainkey.example.com), +# using the private key stored in /etc/dkimkeys/example.private. More granular +# setup options can be found in /usr/share/doc/opendkim/README.opendkim. +Domain toetersnoet.nl,jobvdvalk.nl,toetersnoet.online,jobvdvalk.com +Selector 2021 +KeyFile /etc/dkimkeys/2021.private + +# In Debian, opendkim runs as user "opendkim". A umask of 007 is required when +# using a local socket with MTAs that access the socket as a non-privileged +# user (for example, Postfix). You may need to add user "postfix" to group +# "opendkim" in that case. +UserID opendkim +UMask 007 + +# Socket for the MTA connection (required). If the MTA is inside a chroot jail, +# it must be ensured that the socket is accessible. In Debian, Postfix runs in +# a chroot in /var/spool/postfix, therefore a Unix socket would have to be +# configured as shown on the last line below. +Socket local:/run/opendkim/opendkim.sock +Socket inet:8891@localhost +#Socket inet:8891 +#Socket local:/var/spool/postfix/opendkim/opendkim.sock + +PidFile /run/opendkim/opendkim.pid + +# Hosts for which to sign rather than verify, default is 127.0.0.1. See the +# OPERATION section of opendkim(8) for more information. +#InternalHosts 192.168.0.0/16, 10.0.0.0/8, 172.16.0.0/12 + +# The trust anchor enables DNSSEC. In Debian, the trust anchor file is provided +# by the package dns-root-data. +TrustAnchorFile /usr/share/dns/root.key +#Nameservers 127.0.0.1 diff --git a/opendmarc.conf b/opendmarc.conf new file mode 100644 index 0000000..400c47e --- /dev/null +++ b/opendmarc.conf @@ -0,0 +1,119 @@ +# This is a basic configuration that can easily be adapted to suit a standard +# installation. For more advanced options, see openmarc.conf(5) and/or +# /usr/share/doc/opendmarc/examples/opendmarc.conf.sample. + +## AuthservID (string) +## defaults to MTA name +## +## Sets the "authserv-id" to use when generating the Authentication-Results: +## header field after verifying a message. If the string "HOSTNAME" is +## provided, the name of the host running the filter (as returned by the +## gethostname(3) function) will be used. +# +AuthservID OpenDMARC +TrustedAuthservIDs mail.toetersnoet.nl + +## FailureReports { true | false } +## default "false" +## +## Enables generation of failure reports when the DMARC test fails and the +## purported sender of the message has requested such reports. Reports are +## formatted per RFC6591. +# +# FailureReports false + +## PidFile path +## default (none) +## +## Specifies the path to a file that should be created at process start +## containing the process ID. +# +PidFile /run/opendmarc/opendmarc.pid + +## PublicSuffixList path +## default (none) +## +## Specifies the path to a file that contains top-level domains (TLDs) that +## will be used to compute the Organizational Domain for a given domain name, +## as described in the DMARC specification. If not provided, the filter will +## not be able to determine the Organizational Domain and only the presented +## domain will be evaluated. +# +PublicSuffixList /usr/share/publicsuffix/public_suffix_list.dat + +## RejectFailures { true | false } +## default "false" +## +## If set, messages will be rejected if they fail the DMARC evaluation, or +## temp-failed if evaluation could not be completed. By default, no message +## will be rejected or temp-failed regardless of the outcome of the DMARC +## evaluation of the message. Instead, an Authentication-Results header +## field will be added. +# +RejectFailures true + +## Socket socketspec +## default (none) +## +## Specifies the socket that should be established by the filter to receive +## connections from sendmail(8) in order to provide service. socketspec is +## in one of two forms: local:path, which creates a UNIX domain socket at +## the specified path, or inet:port[@host] or inet6:port[@host] which creates +## a TCP socket on the specified port for the appropriate protocol family. +## If the host is not given as either a hostname or an IP address, the +## socket will be listening on all interfaces. This option is mandatory +## either in the configuration file or on the command line. If an IP +## address is used, it must be enclosed in square brackets. +# +Socket local:/var/spool/postfix/opendmarc/opendmarc.sock + +## Syslog { true | false } +## default "false" +## +## Log via calls to syslog(3) any interesting activity. +# +Syslog true + +## SyslogFacility facility-name +## default "mail" +## +## Log via calls to syslog(3) using the named facility. The facility names +## are the same as the ones allowed in syslog.conf(5). +# +# SyslogFacility mail + +## TrustedAuthservIDs string +## default HOSTNAME +## +## Specifies one or more "authserv-id" values to trust as relaying true +## upstream DKIM and SPF results. The default is to use the name of +## the MTA processing the message. To specify a list, separate each entry +## with a comma. The key word "HOSTNAME" will be replaced by the name of +## the host running the filter as reported by the gethostname(3) function. +# +# TrustedAuthservIDs HOSTNAME + +## UMask mask +## default (none) +## +## Requests a specific permissions mask to be used for file creation. This +## only really applies to creation of the socket when Socket specifies a +## UNIX domain socket, and to the HistoryFile and PidFile (if any); temporary +## files are normally created by the mkstemp(3) function that enforces a +## specific file mode on creation regardless of the process umask. See +## umask(2) for more information. +# +UMask 0002 + +## UserID user[:group] +## default (none) +## +## Attempts to become the specified userid before starting operations. +## The process will be assigned all of the groups and primary group ID of +## the named userid unless an alternate group is specified. +# +UserID opendmarc + +IgnoreAuthenticatedClients true +RequiredHeaders true +SPFSelfValidate true diff --git a/postfix-policyd-spf-python/policyd-spf.conf b/postfix-policyd-spf-python/policyd-spf.conf new file mode 100644 index 0000000..4f53d9c --- /dev/null +++ b/postfix-policyd-spf-python/policyd-spf.conf @@ -0,0 +1,13 @@ +# For a fully commented sample config file see policyd-spf.conf.commented + +debugLevel = 1 +TestOnly = 1 + +HELO_reject = Fail +Mail_From_reject = Fail + +PermError_reject = False +TempError_Defer = False + +skip_addresses = 127.0.0.0/8,::ffff:127.0.0.0/104,::1 + diff --git a/postfix/dynamicmaps.cf b/postfix/dynamicmaps.cf new file mode 100644 index 0000000..548c7c7 --- /dev/null +++ b/postfix/dynamicmaps.cf @@ -0,0 +1,2 @@ +# dict-type so-name (pathname) dict-function mkmap-function +mysql postfix-mysql.so dict_mysql_open diff --git a/postfix/main.cf b/postfix/main.cf new file mode 100644 index 0000000..f0e05f7 --- /dev/null +++ b/postfix/main.cf @@ -0,0 +1,94 @@ +# See /usr/share/postfix/main.cf.dist for a commented, more complete version + + +# Debian specific: Specifying a file name will cause the first +# line of that file to be used as the name. The Debian default +# is /etc/mailname. +#myorigin = /etc/mailname + +smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) +biff = no + +# appending .domain is the MUA's job. +append_dot_mydomain = no + +# Uncomment the next line to generate "delayed mail" warnings +#delay_warning_time = 4h + +readme_directory = no + +# See http://www.postfix.org/COMPATIBILITY_README.html -- default to 3.6 on +# fresh installs. +compatibility_level = 3.6 + + + +# TLS parameters +smtpd_tls_loglevel = 0 + +smtpd_tls_cert_file=/etc/letsencrypt/live/mail.toetersnoet.nl/fullchain.pem +smtpd_tls_key_file=/etc/letsencrypt/live/mail.toetersnoet.nl/privkey.pem +smtpd_tls_security_level=encrypt + +#smtp_tls_CAfile=/etc/ssl/certs/ca-certificates.crt + +smtp_tls_CApath=/etc/ssl/certs +smtp_tls_security_level=may +smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache + + +smtpd_relay_restrictions = permit_mynetworks permit_sasl_authenticated defer_unauth_destination +myhostname = toetersnoet.nl +alias_maps = hash:/etc/aliases +alias_database = hash:/etc/aliases +myorigin = /etc/mailname +mydestination = localhost.localdomain, localhost +relayhost = +mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 +mailbox_size_limit = 0 +recipient_delimiter = + +inet_interfaces = all +inet_protocols = ipv4 + +#spf +policy-spf_time = 3600s +smtpd_recipient_restrictions = permit_sasl_authenticated reject_unauth_destination permit_mynetworks check_policy_service unix:private/policy-spf + +#dkim/dmarc +milter_default_action = accept +milter_protocol = 6 +smtpd_milters = inet:localhost:8891,local:opendmarc/opendmarc.sock +non_smtpd_milters = $smtpd_milters + + +#imap +home_mailbox = Maildir/ +mailbox_command = + +#virtual mail file settings +virtual_mailbox_base = /var/mail + +#virtual_mailbox_maps = hash:/etc/postfix/vmailbox +#virtual_alias_maps = hash:/etc/postfix/virtual +#virtual_mailbox_domains = toetersnoet.nl + +virtual_minimum_uid = 100 +virtual_uid_maps = static:5000 +virtual_gid_maps = static:5000 + +#virtual mail settings +virtual_mailbox_domains = mysql:/etc/postfix/virtual-mailbox-domains.conf +virtual_mailbox_maps = mysql:/etc/postfix/virtual-mailbox-users.conf +virtual_alias_maps = mysql:/etc/postfix/virtual-alias-maps.conf +sender_canonical_maps = mysql:/etc/postfix/virtual-canonical-maps.conf + +#dovecot +#virtual_transport = dovecot +smtpd_sasl_type = dovecot +smtpd_sasl_path = private/auth +smtpd_sasl_auth_enable = yes +#smtpd_sender_login_maps = mysql:/etc/postfix/virtual-mailbox-users.conf +#smtpd_sender_restrictions = permit_sasl_authenticated + +#snmp monitoring +maillog_file=/var/log/maillog diff --git a/postfix/main.cf.proto b/postfix/main.cf.proto new file mode 100644 index 0000000..71097d1 --- /dev/null +++ b/postfix/main.cf.proto @@ -0,0 +1,693 @@ +# Global Postfix configuration file. This file lists only a subset +# of all parameters. For the syntax, and for a complete parameter +# list, see the postconf(5) manual page (command: "man 5 postconf"). +# +# TIP: use the command "postconf -n" to view main.cf parameter +# settings, "postconf parametername" to view a specific parameter, +# and "postconf 'parametername=value'" to set a specific parameter. +# +# For common configuration examples, see BASIC_CONFIGURATION_README +# and STANDARD_CONFIGURATION_README. To find these documents, use +# the command "postconf html_directory readme_directory", or go to +# http://www.postfix.org/BASIC_CONFIGURATION_README.html etc. +# +# For best results, change no more than 2-3 parameters at a time, +# and test if Postfix still works after every change. + +# COMPATIBILITY +# +# The compatibility_level determines what default settings Postfix +# will use for main.cf and master.cf settings. These defaults will +# change over time. +# +# To avoid breaking things, Postfix will use backwards-compatible +# default settings and log where it uses those old backwards-compatible +# default settings, until the system administrator has determined +# if any backwards-compatible default settings need to be made +# permanent in main.cf or master.cf. +# +# When this review is complete, update the compatibility_level setting +# below as recommended in the RELEASE_NOTES file. +# +# The level below is what should be used with new (not upgrade) installs. +# +compatibility_level = 3.7 + +# SOFT BOUNCE +# +# The soft_bounce parameter provides a limited safety net for +# testing. When soft_bounce is enabled, mail will remain queued that +# would otherwise bounce. This parameter disables locally-generated +# bounces, and prevents the SMTP server from rejecting mail permanently +# (by changing 5xx replies into 4xx replies). However, soft_bounce +# is no cure for address rewriting mistakes or mail routing mistakes. +# +#soft_bounce = no + +# LOCAL PATHNAME INFORMATION +# +# The queue_directory specifies the location of the Postfix queue. +# This is also the root directory of Postfix daemons that run chrooted. +# See the files in examples/chroot-setup for setting up Postfix chroot +# environments on different UNIX systems. +# +#queue_directory = /var/spool/postfix + +# The command_directory parameter specifies the location of all +# postXXX commands. +# +command_directory = /usr/sbin + +# The daemon_directory parameter specifies the location of all Postfix +# daemon programs (i.e. programs listed in the master.cf file). This +# directory must be owned by root. +# +daemon_directory = /usr/lib/postfix/sbin + +# The data_directory parameter specifies the location of Postfix-writable +# data files (caches, random numbers). This directory must be owned +# by the mail_owner account (see below). +# +data_directory = /var/lib/postfix + +# QUEUE AND PROCESS OWNERSHIP +# +# The mail_owner parameter specifies the owner of the Postfix queue +# and of most Postfix daemon processes. Specify the name of a user +# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS +# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM. In +# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED +# USER. +# +#mail_owner = postfix + +# The default_privs parameter specifies the default rights used by +# the local delivery agent for delivery to external file or command. +# These rights are used in the absence of a recipient user context. +# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER. +# +#default_privs = nobody + +# INTERNET HOST AND DOMAIN NAMES +# +# The myhostname parameter specifies the internet hostname of this +# mail system. The default is to use the fully-qualified domain name +# from gethostname(). $myhostname is used as a default value for many +# other configuration parameters. +# +#myhostname = host.domain.tld +#myhostname = virtual.domain.tld + +# The mydomain parameter specifies the local internet domain name. +# The default is to use $myhostname minus the first component. +# $mydomain is used as a default value for many other configuration +# parameters. +# +#mydomain = domain.tld + +# SENDING MAIL +# +# The myorigin parameter specifies the domain that locally-posted +# mail appears to come from. The default is to append $myhostname, +# which is fine for small sites. If you run a domain with multiple +# machines, you should (1) change this to $mydomain and (2) set up +# a domain-wide alias database that aliases each user to +# user@that.users.mailhost. +# +# For the sake of consistency between sender and recipient addresses, +# myorigin also specifies the default domain name that is appended +# to recipient addresses that have no @domain part. +# +# Debian GNU/Linux specific: Specifying a file name will cause the +# first line of that file to be used as the name. The Debian default +# is /etc/mailname. +# +#myorigin = /etc/mailname +#myorigin = $myhostname +#myorigin = $mydomain + +# RECEIVING MAIL + +# The inet_interfaces parameter specifies the network interface +# addresses that this mail system receives mail on. By default, +# the software claims all active interfaces on the machine. The +# parameter also controls delivery of mail to user@[ip.address]. +# +# See also the proxy_interfaces parameter, for network addresses that +# are forwarded to us via a proxy or network address translator. +# +# Note: you need to stop/start Postfix when this parameter changes. +# +#inet_interfaces = all +#inet_interfaces = $myhostname +#inet_interfaces = $myhostname, localhost + +# The proxy_interfaces parameter specifies the network interface +# addresses that this mail system receives mail on by way of a +# proxy or network address translation unit. This setting extends +# the address list specified with the inet_interfaces parameter. +# +# You must specify your proxy/NAT addresses when your system is a +# backup MX host for other domains, otherwise mail delivery loops +# will happen when the primary MX host is down. +# +#proxy_interfaces = +#proxy_interfaces = 1.2.3.4 + +# The mydestination parameter specifies the list of domains that this +# machine considers itself the final destination for. +# +# These domains are routed to the delivery agent specified with the +# local_transport parameter setting. By default, that is the UNIX +# compatible delivery agent that lookups all recipients in /etc/passwd +# and /etc/aliases or their equivalent. +# +# The default is $myhostname + localhost.$mydomain + localhost. On +# a mail domain gateway, you should also include $mydomain. +# +# Do not specify the names of virtual domains - those domains are +# specified elsewhere (see VIRTUAL_README). +# +# Do not specify the names of domains that this machine is backup MX +# host for. Specify those names via the relay_domains settings for +# the SMTP server, or use permit_mx_backup if you are lazy (see +# STANDARD_CONFIGURATION_README). +# +# The local machine is always the final destination for mail addressed +# to user@[the.net.work.address] of an interface that the mail system +# receives mail on (see the inet_interfaces parameter). +# +# Specify a list of host or domain names, /file/name or type:table +# patterns, separated by commas and/or whitespace. A /file/name +# pattern is replaced by its contents; a type:table is matched when +# a name matches a lookup key (the right-hand side is ignored). +# Continue long lines by starting the next line with whitespace. +# +# See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS". +# +#mydestination = $myhostname, localhost.$mydomain, localhost +#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain +#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain, +# mail.$mydomain, www.$mydomain, ftp.$mydomain + +# REJECTING MAIL FOR UNKNOWN LOCAL USERS +# +# The local_recipient_maps parameter specifies optional lookup tables +# with all names or addresses of users that are local with respect +# to $mydestination, $inet_interfaces or $proxy_interfaces. +# +# If this parameter is defined, then the SMTP server will reject +# mail for unknown local users. This parameter is defined by default. +# +# To turn off local recipient checking in the SMTP server, specify +# local_recipient_maps = (i.e. empty). +# +# The default setting assumes that you use the default Postfix local +# delivery agent for local delivery. You need to update the +# local_recipient_maps setting if: +# +# - You define $mydestination domain recipients in files other than +# /etc/passwd, /etc/aliases, or the $virtual_alias_maps files. +# For example, you define $mydestination domain recipients in +# the $virtual_mailbox_maps files. +# +# - You redefine the local delivery agent in master.cf. +# +# - You redefine the "local_transport" setting in main.cf. +# +# - You use the "luser_relay", "mailbox_transport", or "fallback_transport" +# feature of the Postfix local delivery agent (see local(8)). +# +# Details are described in the LOCAL_RECIPIENT_README file. +# +# Beware: if the Postfix SMTP server runs chrooted, you probably have +# to access the passwd file via the proxymap service, in order to +# overcome chroot restrictions. The alternative, having a copy of +# the system passwd file in the chroot jail is just not practical. +# +# The right-hand side of the lookup tables is conveniently ignored. +# In the left-hand side, specify a bare username, an @domain.tld +# wild-card, or specify a user@domain.tld address. +# +#local_recipient_maps = unix:passwd.byname $alias_maps +#local_recipient_maps = proxy:unix:passwd.byname $alias_maps +#local_recipient_maps = + +# The unknown_local_recipient_reject_code specifies the SMTP server +# response code when a recipient domain matches $mydestination or +# ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty +# and the recipient address or address local-part is not found. +# +# The default setting is 550 (reject mail) but it is safer to start +# with 450 (try again later) until you are certain that your +# local_recipient_maps settings are OK. +# +unknown_local_recipient_reject_code = 550 + +# TRUST AND RELAY CONTROL + +# The mynetworks parameter specifies the list of "trusted" SMTP +# clients that have more privileges than "strangers". +# +# In particular, "trusted" SMTP clients are allowed to relay mail +# through Postfix. See the smtpd_recipient_restrictions parameter +# in postconf(5). +# +# You can specify the list of "trusted" network addresses by hand +# or you can let Postfix do it for you (which is the default). +# +# By default (mynetworks_style = host), Postfix "trusts" only +# the local machine. +# +# Specify "mynetworks_style = subnet" when Postfix should "trust" +# SMTP clients in the same IP subnetworks as the local machine. +# On Linux, this works correctly only with interfaces specified +# with the "ifconfig" or "ip" command. +# +# Specify "mynetworks_style = class" when Postfix should "trust" SMTP +# clients in the same IP class A/B/C networks as the local machine. +# Don't do this with a dialup site - it would cause Postfix to "trust" +# your entire provider's network. Instead, specify an explicit +# mynetworks list by hand, as described below. +# +# Specify "mynetworks_style = host" when Postfix should "trust" +# only the local machine. +# +#mynetworks_style = class +#mynetworks_style = subnet +#mynetworks_style = host + +# Alternatively, you can specify the mynetworks list by hand, in +# which case Postfix ignores the mynetworks_style setting. +# +# Specify an explicit list of network/netmask patterns, where the +# mask specifies the number of bits in the network part of a host +# address. +# +# You can also specify the absolute pathname of a pattern file instead +# of listing the patterns here. Specify type:table for table-based lookups +# (the value on the table right-hand side is not used). +# +#mynetworks = 168.100.3.0/28, 127.0.0.0/8 +#mynetworks = $config_directory/mynetworks +#mynetworks = hash:/etc/postfix/network_table +mynetworks = 127.0.0.0/8 + +# The relay_domains parameter restricts what destinations this system will +# relay mail to. See the smtpd_relay_restrictions and +# smtpd_recipient_restrictions descriptions in postconf(5) for detailed +# information. +# +# By default, Postfix relays mail +# - from "trusted" clients (IP address matches $mynetworks, or is +# SASL authenticated) to any destination, +# - from "untrusted" clients to destinations that match $relay_domains or +# subdomains thereof, except addresses with sender-specified routing. +# The default relay_domains value is empty. +# +# In addition to the above, the Postfix SMTP server by default accepts mail +# that Postfix is final destination for: +# - destinations that match $inet_interfaces or $proxy_interfaces, +# - destinations that match $mydestination +# - destinations that match $virtual_alias_domains, +# - destinations that match $virtual_mailbox_domains. +# These destinations do not need to be listed in $relay_domains. +# +# Specify a list of hosts or domains, /file/name patterns or type:name +# lookup tables, separated by commas and/or whitespace. Continue +# long lines by starting the next line with whitespace. A file name +# is replaced by its contents; a type:name table is matched when a +# (parent) domain appears as lookup key. +# +# NOTE: Postfix will not automatically forward mail for domains that +# list this system as their primary or backup MX host. See the +# permit_mx_backup restriction description in postconf(5). +# +#relay_domains = + +# INTERNET OR INTRANET + +# The relayhost parameter specifies the default host to send mail to +# when no entry is matched in the optional transport(5) table. When +# no relayhost is given, mail is routed directly to the destination. +# +# On an intranet, specify the organizational domain name. If your +# internal DNS uses no MX records, specify the name of the intranet +# gateway host instead. +# +# In the case of SMTP, specify a domain, host, host:port, [host]:port, +# [address] or [address]:port; the form [host] turns off MX lookups. +# +# If you're connected via UUCP, see also the default_transport parameter. +# +#relayhost = $mydomain +#relayhost = [gateway.my.domain] +#relayhost = [mailserver.isp.tld] +#relayhost = uucphost +#relayhost = [an.ip.add.ress] + +# REJECTING UNKNOWN RELAY USERS +# +# The relay_recipient_maps parameter specifies optional lookup tables +# with all addresses in the domains that match $relay_domains. +# +# If this parameter is defined, then the SMTP server will reject +# mail for unknown relay users. This feature is off by default. +# +# The right-hand side of the lookup tables is conveniently ignored. +# In the left-hand side, specify an @domain.tld wild-card, or specify +# a user@domain.tld address. +# +#relay_recipient_maps = hash:/etc/postfix/relay_recipients + +# INPUT RATE CONTROL +# +# The in_flow_delay configuration parameter implements mail input +# flow control. This feature is turned on by default, although it +# still needs further development (it's disabled on SCO UNIX due +# to an SCO bug). +# +# A Postfix process will pause for $in_flow_delay seconds before +# accepting a new message, when the message arrival rate exceeds the +# message delivery rate. With the default 100 SMTP server process +# limit, this limits the mail inflow to 100 messages a second more +# than the number of messages delivered per second. +# +# Specify 0 to disable the feature. Valid delays are 0..10. +# +#in_flow_delay = 1s + +# ADDRESS REWRITING +# +# The ADDRESS_REWRITING_README document gives information about +# address masquerading or other forms of address rewriting including +# username->Firstname.Lastname mapping. + +# ADDRESS REDIRECTION (VIRTUAL DOMAIN) +# +# The VIRTUAL_README document gives information about the many forms +# of domain hosting that Postfix supports. + +# "USER HAS MOVED" BOUNCE MESSAGES +# +# See the discussion in the ADDRESS_REWRITING_README document. + +# TRANSPORT MAP +# +# See the discussion in the ADDRESS_REWRITING_README document. + +# ALIAS DATABASE +# +# The alias_maps parameter specifies the list of alias databases used +# by the local delivery agent. The default list is system dependent. +# +# On systems with NIS, the default is to search the local alias +# database, then the NIS alias database. See aliases(5) for syntax +# details. +# +# If you change the alias database, run "postalias /etc/aliases" (or +# wherever your system stores the mail alias file), or simply run +# "newaliases" to build the necessary DBM or DB file. +# +# It will take a minute or so before changes become visible. Use +# "postfix reload" to eliminate the delay. +# +#alias_maps = dbm:/etc/aliases +#alias_maps = hash:/etc/aliases +#alias_maps = hash:/etc/aliases, nis:mail.aliases +#alias_maps = netinfo:/aliases + +# The alias_database parameter specifies the alias database(s) that +# are built with "newaliases" or "sendmail -bi". This is a separate +# configuration parameter, because alias_maps (see above) may specify +# tables that are not necessarily all under control by Postfix. +# +#alias_database = dbm:/etc/aliases +#alias_database = dbm:/etc/mail/aliases +#alias_database = hash:/etc/aliases +#alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases + +# ADDRESS EXTENSIONS (e.g., user+foo) +# +# The recipient_delimiter parameter specifies the separator between +# user names and address extensions (user+foo). See canonical(5), +# local(8), relocated(5) and virtual(5) for the effects this has on +# aliases, canonical, virtual, relocated and .forward file lookups. +# Basically, the software tries user+foo and .forward+foo before +# trying user and .forward. +# +#recipient_delimiter = + + +# DELIVERY TO MAILBOX +# +# The home_mailbox parameter specifies the optional pathname of a +# mailbox file relative to a user's home directory. The default +# mailbox file is /var/spool/mail/user or /var/mail/user. Specify +# "Maildir/" for qmail-style delivery (the / is required). +# +#home_mailbox = Mailbox +#home_mailbox = Maildir/ + +# The mail_spool_directory parameter specifies the directory where +# UNIX-style mailboxes are kept. The default setting depends on the +# system type. +# +#mail_spool_directory = /var/mail +#mail_spool_directory = /var/spool/mail + +# The mailbox_command parameter specifies the optional external +# command to use instead of mailbox delivery. The command is run as +# the recipient with proper HOME, SHELL and LOGNAME environment settings. +# Exception: delivery for root is done as $default_user. +# +# Other environment variables of interest: USER (recipient username), +# EXTENSION (address extension), DOMAIN (domain part of address), +# and LOCAL (the address localpart). +# +# Unlike other Postfix configuration parameters, the mailbox_command +# parameter is not subjected to $parameter substitutions. This is to +# make it easier to specify shell syntax (see example below). +# +# Avoid shell meta characters because they will force Postfix to run +# an expensive shell process. Procmail alone is expensive enough. +# +# IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN +# ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER. +# +#mailbox_command = /usr/bin/procmail +#mailbox_command = /usr/bin/procmail -a "$EXTENSION" + +# The mailbox_transport specifies the optional transport in master.cf +# to use after processing aliases and .forward files. This parameter +# has precedence over the mailbox_command, fallback_transport and +# luser_relay parameters. +# +# Specify a string of the form transport:nexthop, where transport is +# the name of a mail delivery transport defined in master.cf. The +# :nexthop part is optional. For more details see the sample transport +# configuration file. +# +# NOTE: if you use this feature for accounts not in the UNIX password +# file, then you must update the "local_recipient_maps" setting in +# the main.cf file, otherwise the SMTP server will reject mail for +# non-UNIX accounts with "User unknown in local recipient table". +# +# Cyrus IMAP over LMTP. Specify ``lmtpunix cmd="lmtpd" +# listen="/var/imap/socket/lmtp" prefork=0'' in cyrus.conf. +#mailbox_transport = lmtp:unix:/var/imap/socket/lmtp +# +# Cyrus IMAP via command line. Uncomment the "cyrus...pipe" and +# subsequent line in master.cf. +#mailbox_transport = cyrus + +# The fallback_transport specifies the optional transport in master.cf +# to use for recipients that are not found in the UNIX passwd database. +# This parameter has precedence over the luser_relay parameter. +# +# Specify a string of the form transport:nexthop, where transport is +# the name of a mail delivery transport defined in master.cf. The +# :nexthop part is optional. For more details see the sample transport +# configuration file. +# +# NOTE: if you use this feature for accounts not in the UNIX password +# file, then you must update the "local_recipient_maps" setting in +# the main.cf file, otherwise the SMTP server will reject mail for +# non-UNIX accounts with "User unknown in local recipient table". +# +#fallback_transport = lmtp:unix:/file/name +#fallback_transport = cyrus +#fallback_transport = + +# The luser_relay parameter specifies an optional destination address +# for unknown recipients. By default, mail for unknown@$mydestination, +# unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned +# as undeliverable. +# +# The following expansions are done on luser_relay: $user (recipient +# username), $shell (recipient shell), $home (recipient home directory), +# $recipient (full recipient address), $extension (recipient address +# extension), $domain (recipient domain), $local (entire recipient +# localpart), $recipient_delimiter. Specify ${name?value} or +# ${name:value} to expand value only when $name does (does not) exist. +# +# luser_relay works only for the default Postfix local delivery agent. +# +# NOTE: if you use this feature for accounts not in the UNIX password +# file, then you must specify "local_recipient_maps =" (i.e. empty) in +# the main.cf file, otherwise the SMTP server will reject mail for +# non-UNIX accounts with "User unknown in local recipient table". +# +#luser_relay = $user@other.host +#luser_relay = $local@other.host +#luser_relay = admin+$local + +# JUNK MAIL CONTROLS +# +# The controls listed here are only a very small subset. The file +# SMTPD_ACCESS_README provides an overview. + +# The header_checks parameter specifies an optional table with patterns +# that each logical message header is matched against, including +# headers that span multiple physical lines. +# +# By default, these patterns also apply to MIME headers and to the +# headers of attached messages. With older Postfix versions, MIME and +# attached message headers were treated as body text. +# +# For details, see "man header_checks". +# +#header_checks = regexp:/etc/postfix/header_checks + +# FAST ETRN SERVICE +# +# Postfix maintains per-destination logfiles with information about +# deferred mail, so that mail can be flushed quickly with the SMTP +# "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld". +# See the ETRN_README document for a detailed description. +# +# The fast_flush_domains parameter controls what destinations are +# eligible for this service. By default, they are all domains that +# this server is willing to relay mail to. +# +#fast_flush_domains = $relay_domains + +# SHOW SOFTWARE VERSION OR NOT +# +# The smtpd_banner parameter specifies the text that follows the 220 +# code in the SMTP server's greeting banner. Some people like to see +# the mail version advertised. By default, Postfix shows no version. +# +# You MUST specify $myhostname at the start of the text. That is an +# RFC requirement. Postfix itself does not care. +# +#smtpd_banner = $myhostname ESMTP $mail_name +#smtpd_banner = $myhostname ESMTP $mail_name ($mail_version) +smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) + + +# PARALLEL DELIVERY TO THE SAME DESTINATION +# +# How many parallel deliveries to the same user or domain? With local +# delivery, it does not make sense to do massively parallel delivery +# to the same user, because mailbox updates must happen sequentially, +# and expensive pipelines in .forward files can cause disasters when +# too many are run at the same time. With SMTP deliveries, 10 +# simultaneous connections to the same domain could be sufficient to +# raise eyebrows. +# +# Each message delivery transport has its XXX_destination_concurrency_limit +# parameter. The default is $default_destination_concurrency_limit for +# most delivery transports. For the local delivery agent the default is 2. + +#local_destination_concurrency_limit = 2 +#default_destination_concurrency_limit = 20 + +# DEBUGGING CONTROL +# +# The debug_peer_level parameter specifies the increment in verbose +# logging level when an SMTP client or server host name or address +# matches a pattern in the debug_peer_list parameter. +# +#debug_peer_level = 2 + +# The debug_peer_list parameter specifies an optional list of domain +# or network patterns, /file/name patterns or type:name tables. When +# an SMTP client or server host name or address matches a pattern, +# increase the verbose logging level by the amount specified in the +# debug_peer_level parameter. +# +#debug_peer_list = 127.0.0.1 +#debug_peer_list = some.domain + +# The debugger_command specifies the external command that is executed +# when a Postfix daemon program is run with the -D option. +# +# Use "command .. & sleep 5" so that the debugger can attach before +# the process marches on. If you use an X-based debugger, be sure to +# set up your XAUTHORITY environment variable before starting Postfix. +# +debugger_command = + PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin + ddd $daemon_directory/$process_name $process_id & sleep 5 + +# If you can't use X, use this to capture the call stack when a +# daemon crashes. The result is in a file in the configuration +# directory, and is named after the process name and the process ID. +# +# debugger_command = +# PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont; +# echo where) | gdb $daemon_directory/$process_name $process_id 2>&1 +# >$config_directory/$process_name.$process_id.log & sleep 5 +# +# Another possibility is to run gdb under a detached screen session. +# To attach to the screen session, su root and run "screen -r +# " where uniquely matches one of the detached +# sessions (from "screen -list"). +# +# debugger_command = +# PATH=/bin:/usr/bin:/sbin:/usr/sbin; export PATH; screen +# -dmS $process_name gdb $daemon_directory/$process_name +# $process_id & sleep 1 + +# INSTALL-TIME CONFIGURATION INFORMATION +# +# The following parameters are used when installing a new Postfix version. +# +# sendmail_path: The full pathname of the Postfix sendmail command. +# This is the Sendmail-compatible mail posting interface. +# +sendmail_path = + +# newaliases_path: The full pathname of the Postfix newaliases command. +# This is the Sendmail-compatible command to build alias databases. +# +newaliases_path = + +# mailq_path: The full pathname of the Postfix mailq command. This +# is the Sendmail-compatible mail queue listing command. +# +mailq_path = + +# setgid_group: The group for mail submission and queue management +# commands. This must be a group name with a numerical group ID that +# is not shared with other accounts, not even with the Postfix account. +# +setgid_group = + +# html_directory: The location of the Postfix HTML documentation. +# +html_directory = + +# manpage_directory: The location of the Postfix on-line manual pages. +# +manpage_directory = + +# sample_directory: The location of the Postfix sample configuration files. +# This parameter is obsolete as of Postfix 2.1. +# +sample_directory = + +# readme_directory: The location of the Postfix README files. +# +readme_directory = +inet_protocols = ipv4 diff --git a/postfix/makedefs.out b/postfix/makedefs.out new file mode 120000 index 0000000..c8ae63e --- /dev/null +++ b/postfix/makedefs.out @@ -0,0 +1 @@ +/usr/share/postfix/makedefs.out \ No newline at end of file diff --git a/postfix/master.cf b/postfix/master.cf new file mode 100644 index 0000000..1b954a6 --- /dev/null +++ b/postfix/master.cf @@ -0,0 +1,180 @@ +# +# Postfix master process configuration file. For details on the format +# of the file, see the master(5) manual page (command: "man 5 master" or +# on-line: http://www.postfix.org/master.5.html). +# +# Do not forget to execute "postfix reload" after editing this file. +# +# ========================================================================== +# service type private unpriv chroot wakeup maxproc command + args +# (yes) (yes) (no) (never) (100) +# ========================================================================== +smtp inet n - y - - smtpd +#smtp inet n - y - 1 postscreen +#smtpd pass - - y - - smtpd +#dnsblog unix - - y - 0 dnsblog +#tlsproxy unix - - y - 0 tlsproxy +# Choose one: enable submission for loopback clients only, or for any client. +#127.0.0.1:submission inet n - y - - smtpd + +smtps inet n - y - - smtpd + -o syslog_name=postfix/smtps + -o smtpd_tls_wrappermode=yes + -o smtpd_sasl_auth_enable=yes + -o smtpd_relay_restrictions=permit_sasl_authenticated,reject + -o smtpd_recipient_restrictions=permit_mynetworks,permit_sasl_authenticated,reject + -o smtpd_sasl_type=dovecot + -o smtpd_sasl_path=private/auth +# -o smtpd_tls_cert_file=/etc/letsencrypt/live/mail.toetersnoet.nl/fullchain.pem +# -o smtpd_tls_key_file=/etc/letsencrypt/live/mail.toetersnoet.nl/privkey.pem + +submission inet n - y - - smtpd + -o smtpd_tls_security_level=encrypt +# -o smtpd_tls_cert_file=/etc/letsencrypt/live/mail.toetersnoet.nl/cert.pem +# -o smtpd_tls_key_file=/etc/letsencrypt/live/mail.toetersnoet.nl/privkey.pem + -o smtpd_sasl_auth_enable=yes + -o smtpd_sasl_type=dovecot + -o smtpd_sasl_path=private/auth + -o smtpd_sasl_security_options=noanonymous + -o smtpd_sasl_local_domain=mysql:/etc/postfix/virtual-mailbox-domains.conf + -o smtpd_client_restrictions=permit_sasl_authenticated,reject + -o smtpd_sender_login_maps=mysql:/etc/postfix/virtual-mailbox-senders.conf + -o smtpd_sender_restrictions=reject_sender_login_mismatch,permit_sasl_authenticated + -o smtpd_recipient_restrictions=reject_non_fqdn_recipient,reject_unknown_recipient_domain,permit_sasl_authenticated,reject + +#submission inet n - y - - smtpd +# -o smtpd_tls_security_level=encrypt +# -o smtpd_sasl_auth_enable=yes +# -o smtpd_sasl_type=dovecot +# -o smtpd_sasl_path=private/auth +# -o smtpd_sasl_security_options=noanonymous +# -o smtpd_sasl_local_domain=$myhostname +# -o smtpd_client_restrictions=permit_sasl_authenticated,reject +# -o smtpd_sender_login_maps=hash:/etc/postfix/virtual +# -o smtpd_sender_restrictions=reject_sender_login_mismatch +# -o smtpd_recipient_restrictions=reject_non_fqdn_recipient,reject_unknown_recipient_domain,permit_sasl_authenticated,reject + +# -o syslog_name=postfix/submission +# -o smtpd_tls_security_level=encrypt +# -o smtpd_sasl_auth_enable=yes +# -o smtpd_tls_auth_only=yes +# -o smtpd_reject_unlisted_recipient=no +# Instead of specifying complex smtpd__restrictions here, +# specify "smtpd__restrictions=$mua__restrictions" +# here, and specify mua__restrictions in main.cf (where +# "" is "client", "helo", "sender", "relay", or "recipient"). +# -o smtpd_client_restrictions= +# -o smtpd_helo_restrictions= +# -o smtpd_sender_restrictions= +# -o smtpd_relay_restrictions= +# -o smtpd_recipient_restrictions=permit_sasl_authenticated,reject +# -o milter_macro_daemon_name=ORIGINATING +# Choose one: enable submissions for loopback clients only, or for any client. +#127.0.0.1:submissions inet n - y - - smtpd +#submissions inet n - y - - smtpd +# -o syslog_name=postfix/submissions +# -o smtpd_tls_wrappermode=yes +# -o smtpd_sasl_auth_enable=yes +# -o smtpd_reject_unlisted_recipient=no +# Instead of specifying complex smtpd__restrictions here, +# specify "smtpd__restrictions=$mua__restrictions" +# here, and specify mua__restrictions in main.cf (where +# "" is "client", "helo", "sender", "relay", or "recipient"). +# -o smtpd_client_restrictions= +# -o smtpd_helo_restrictions= +# -o smtpd_sender_restrictions= +# -o smtpd_relay_restrictions= +# -o smtpd_recipient_restrictions=permit_sasl_authenticated,reject +# -o milter_macro_daemon_name=ORIGINATING +#628 inet n - y - - qmqpd +pickup unix n - y 60 1 pickup +cleanup unix n - y - 0 cleanup +qmgr unix n - n 300 1 qmgr +#qmgr unix n - n 300 1 oqmgr +tlsmgr unix - - y 1000? 1 tlsmgr +rewrite unix - - y - - trivial-rewrite +bounce unix - - y - 0 bounce +defer unix - - y - 0 bounce +trace unix - - y - 0 bounce +verify unix - - y - 1 verify +flush unix n - y 1000? 0 flush +proxymap unix - - n - - proxymap +proxywrite unix - - n - 1 proxymap +smtp unix - - y - - smtp +relay unix - - y - - smtp + -o syslog_name=postfix/$service_name +# -o smtp_helo_timeout=5 -o smtp_connect_timeout=5 +showq unix n - y - - showq +error unix - - y - - error +retry unix - - y - - error +discard unix - - y - - discard +local unix - n n - - local +virtual unix - n n - - virtual +lmtp unix - - y - - lmtp +anvil unix - - y - 1 anvil +scache unix - - y - 1 scache +postlog unix-dgram n - n - 1 postlogd +# +# ==================================================================== +# Interfaces to non-Postfix software. Be sure to examine the manual +# pages of the non-Postfix software to find out what options it wants. +# +# Many of the following services use the Postfix pipe(8) delivery +# agent. See the pipe(8) man page for information about ${recipient} +# and other message envelope options. +# ==================================================================== +# +# maildrop. See the Postfix MAILDROP_README file for details. +# Also specify in main.cf: maildrop_destination_recipient_limit=1 +# +maildrop unix - n n - - pipe + flags=DRXhu user=vmail argv=/usr/bin/maildrop -d ${recipient} +# +# ==================================================================== +# +# Recent Cyrus versions can use the existing "lmtp" master.cf entry. +# +# Specify in cyrus.conf: +# lmtp cmd="lmtpd -a" listen="localhost:lmtp" proto=tcp4 +# +# Specify in main.cf one or more of the following: +# mailbox_transport = lmtp:inet:localhost +# virtual_transport = lmtp:inet:localhost +# +# ==================================================================== +# +# Cyrus 2.1.5 (Amos Gouaux) +# Also specify in main.cf: cyrus_destination_recipient_limit=1 +# +#cyrus unix - n n - - pipe +# flags=DRX user=cyrus argv=/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user} +# +# ==================================================================== +# Old example of delivery via Cyrus. +# +#old-cyrus unix - n n - - pipe +# flags=R user=cyrus argv=/cyrus/bin/deliver -e -m ${extension} ${user} +# +# ==================================================================== +# +# See the Postfix UUCP_README file for configuration details. +# +uucp unix - n n - - pipe + flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient) +# +# Other external delivery methods. +# +ifmail unix - n n - - pipe + flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient) +bsmtp unix - n n - - pipe + flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient +scalemail-backend unix - n n - 2 pipe + flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension} +mailman unix - n n - - pipe + flags=FRX user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py ${nexthop} ${user} + + + +#spf +policy-spf unix - n n - - spawn + user=nobody argv=/usr/bin/policyd-spf diff --git a/postfix/master.cf.proto b/postfix/master.cf.proto new file mode 100644 index 0000000..fd0d581 --- /dev/null +++ b/postfix/master.cf.proto @@ -0,0 +1,137 @@ +# +# Postfix master process configuration file. For details on the format +# of the file, see the master(5) manual page (command: "man 5 master" or +# on-line: http://www.postfix.org/master.5.html). +# +# Do not forget to execute "postfix reload" after editing this file. +# +# ========================================================================== +# service type private unpriv chroot wakeup maxproc command + args +# (yes) (yes) (no) (never) (100) +# ========================================================================== +smtp inet n - y - - smtpd +#smtp inet n - y - 1 postscreen +#smtpd pass - - y - - smtpd +#dnsblog unix - - y - 0 dnsblog +#tlsproxy unix - - y - 0 tlsproxy +# Choose one: enable submission for loopback clients only, or for any client. +#127.0.0.1:submission inet n - y - - smtpd +#submission inet n - y - - smtpd +# -o syslog_name=postfix/submission +# -o smtpd_tls_security_level=encrypt +# -o smtpd_sasl_auth_enable=yes +# -o smtpd_tls_auth_only=yes +# -o smtpd_reject_unlisted_recipient=no +# Instead of specifying complex smtpd__restrictions here, +# specify "smtpd__restrictions=$mua__restrictions" +# here, and specify mua__restrictions in main.cf (where +# "" is "client", "helo", "sender", "relay", or "recipient"). +# -o smtpd_client_restrictions= +# -o smtpd_helo_restrictions= +# -o smtpd_sender_restrictions= +# -o smtpd_relay_restrictions= +# -o smtpd_recipient_restrictions=permit_sasl_authenticated,reject +# -o milter_macro_daemon_name=ORIGINATING +# Choose one: enable submissions for loopback clients only, or for any client. +#127.0.0.1:submissions inet n - y - - smtpd +#submissions inet n - y - - smtpd +# -o syslog_name=postfix/submissions +# -o smtpd_tls_wrappermode=yes +# -o smtpd_sasl_auth_enable=yes +# -o smtpd_reject_unlisted_recipient=no +# Instead of specifying complex smtpd__restrictions here, +# specify "smtpd__restrictions=$mua__restrictions" +# here, and specify mua__restrictions in main.cf (where +# "" is "client", "helo", "sender", "relay", or "recipient"). +# -o smtpd_client_restrictions= +# -o smtpd_helo_restrictions= +# -o smtpd_sender_restrictions= +# -o smtpd_relay_restrictions= +# -o smtpd_recipient_restrictions=permit_sasl_authenticated,reject +# -o milter_macro_daemon_name=ORIGINATING +#628 inet n - y - - qmqpd +pickup unix n - y 60 1 pickup +cleanup unix n - y - 0 cleanup +qmgr unix n - n 300 1 qmgr +#qmgr unix n - n 300 1 oqmgr +tlsmgr unix - - y 1000? 1 tlsmgr +rewrite unix - - y - - trivial-rewrite +bounce unix - - y - 0 bounce +defer unix - - y - 0 bounce +trace unix - - y - 0 bounce +verify unix - - y - 1 verify +flush unix n - y 1000? 0 flush +proxymap unix - - n - - proxymap +proxywrite unix - - n - 1 proxymap +smtp unix - - y - - smtp +relay unix - - y - - smtp + -o syslog_name=postfix/$service_name +# -o smtp_helo_timeout=5 -o smtp_connect_timeout=5 +showq unix n - y - - showq +error unix - - y - - error +retry unix - - y - - error +discard unix - - y - - discard +local unix - n n - - local +virtual unix - n n - - virtual +lmtp unix - - y - - lmtp +anvil unix - - y - 1 anvil +scache unix - - y - 1 scache +postlog unix-dgram n - n - 1 postlogd +# +# ==================================================================== +# Interfaces to non-Postfix software. Be sure to examine the manual +# pages of the non-Postfix software to find out what options it wants. +# +# Many of the following services use the Postfix pipe(8) delivery +# agent. See the pipe(8) man page for information about ${recipient} +# and other message envelope options. +# ==================================================================== +# +# maildrop. See the Postfix MAILDROP_README file for details. +# Also specify in main.cf: maildrop_destination_recipient_limit=1 +# +maildrop unix - n n - - pipe + flags=DRXhu user=vmail argv=/usr/bin/maildrop -d ${recipient} +# +# ==================================================================== +# +# Recent Cyrus versions can use the existing "lmtp" master.cf entry. +# +# Specify in cyrus.conf: +# lmtp cmd="lmtpd -a" listen="localhost:lmtp" proto=tcp4 +# +# Specify in main.cf one or more of the following: +# mailbox_transport = lmtp:inet:localhost +# virtual_transport = lmtp:inet:localhost +# +# ==================================================================== +# +# Cyrus 2.1.5 (Amos Gouaux) +# Also specify in main.cf: cyrus_destination_recipient_limit=1 +# +#cyrus unix - n n - - pipe +# flags=DRX user=cyrus argv=/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user} +# +# ==================================================================== +# Old example of delivery via Cyrus. +# +#old-cyrus unix - n n - - pipe +# flags=R user=cyrus argv=/cyrus/bin/deliver -e -m ${extension} ${user} +# +# ==================================================================== +# +# See the Postfix UUCP_README file for configuration details. +# +uucp unix - n n - - pipe + flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient) +# +# Other external delivery methods. +# +ifmail unix - n n - - pipe + flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient) +bsmtp unix - n n - - pipe + flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient +scalemail-backend unix - n n - 2 pipe + flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension} +mailman unix - n n - - pipe + flags=FRX user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py ${nexthop} ${user} diff --git a/postfix/post-install b/postfix/post-install new file mode 100755 index 0000000..2a7d99b --- /dev/null +++ b/postfix/post-install @@ -0,0 +1,925 @@ +#!/bin/sh + +# To view the formatted manual page of this file, type: +# POSTFIXSOURCE/mantools/srctoman - post-install | nroff -man + +#++ +# NAME +# post-install +# SUMMARY +# Postfix post-installation script +# SYNOPSIS +# postfix post-install [name=value] command ... +# DESCRIPTION +# The post-install script performs the finishing touch of a Postfix +# installation, after the executable programs and configuration +# files are installed. Usage is one of the following: +# .IP o +# While installing Postfix from source code on the local machine, the +# script is run by the postfix-install script to update selected file +# or directory permissions and to update Postfix configuration files. +# .IP o +# While installing Postfix from a pre-built package, the script is run +# by the package management procedure to set all file or directory +# permissions and to update Postfix configuration files. +# .IP o +# The script can be used to change installation parameter settings such +# as mail_owner or setgid_group after Postfix is already installed. +# .IP o +# The script can be used to upgrade configuration files and to upgrade +# file/directory permissions of a secondary Postfix instance. +# .IP o +# At Postfix start-up time, the script is run from "postfix check" to +# create missing queue directories. +# .PP +# The post-install script is controlled by installation parameters. +# Specific parameters are described at the end of this document. +# All installation parameters must be specified ahead of time via +# one of the methods described below. +# +# Arguments +# .IP create-missing +# Create missing queue directories with ownerships and permissions +# according to the contents of $meta_directory/postfix-files +# and optionally in $meta_directory/postfix-files.d/*, using +# the mail_owner and setgid_group parameter settings from the +# command line, process environment or from the installed +# main.cf file. +# +# This is required at Postfix start-up time. +# .IP set-permissions +# Set all file/directory ownerships and permissions according to the +# contents of $meta_directory/postfix-files and optionally +# in $meta_directory/postfix-files.d/*, using the mail_owner +# and setgid_group parameter settings from the command line, +# process environment or from the installed main.cf file. +# Implies create-missing. +# +# This is required when installing Postfix from a pre-built package, +# or when changing the mail_owner or setgid_group installation parameter +# settings after Postfix is already installed. +# .IP upgrade-permissions +# Update ownership and permission of existing files/directories as +# specified in $meta_directory/postfix-files and optionally +# in $meta_directory/postfix-files.d/*, using the mail_owner +# and setgid_group parameter settings from the command line, +# process environment or from the installed main.cf file. +# Implies create-missing. +# +# This is required when upgrading an existing Postfix instance. +# .IP upgrade-configuration +# Edit the installed main.cf and master.cf files, in order to account +# for missing services and to fix deprecated parameter settings. +# +# This is required when upgrading an existing Postfix instance. +# .IP upgrade-source +# Short-hand for: upgrade-permissions upgrade-configuration. +# +# This is recommended when upgrading Postfix from source code. +# .IP upgrade-package +# Short-hand for: set-permissions upgrade-configuration. +# +# This is recommended when upgrading Postfix from a pre-built package. +# .IP first-install-reminder +# Remind the user that they still need to configure main.cf and the +# aliases file, and that newaliases still needs to be run. +# +# This is recommended when Postfix is installed for the first time. +# MULTIPLE POSTFIX INSTANCES +# .ad +# .fi +# Multiple Postfix instances on the same machine can share command and +# daemon program files but must have separate configuration and queue +# directories. +# +# To create a secondary Postfix installation on the same machine, +# copy the configuration files from the primary Postfix instance to +# a secondary configuration directory and execute: +# +# postfix post-install config_directory=secondary-config-directory \e +# .in +4 +# queue_directory=secondary-queue-directory \e +# .br +# create-missing +# .PP +# This creates secondary Postfix queue directories, sets their access +# permissions, and saves the specified installation parameters to the +# secondary main.cf file. +# +# Be sure to list the secondary configuration directory in the +# alternate_config_directories parameter in the primary main.cf file. +# +# To upgrade a secondary Postfix installation on the same machine, +# execute: +# +# postfix post-install config_directory=secondary-config-directory \e +# .in +4 +# upgrade-permissions upgrade-configuration +# INSTALLATION PARAMETER INPUT METHODS +# .ad +# .fi +# Parameter settings can be specified through a variety of +# mechanisms. In order of decreasing precedence these are: +# .IP "command line" +# Parameter settings can be given as name=value arguments on +# the post-install command line. These have the highest precedence. +# Settings that override the installed main.cf file are saved. +# .IP "process environment" +# Parameter settings can be given as name=value environment +# variables. +# Settings that override the installed main.cf file are saved. +# .IP "installed configuration files" +# If a parameter is not specified via the command line or via the +# process environment, post-install will attempt to extract its +# value from the already installed Postfix main.cf configuration file. +# These settings have the lowest precedence. +# INSTALLATION PARAMETER DESCRIPTION +# .ad +# .fi +# The description of installation parameters is as follows: +# .IP config_directory +# The directory for Postfix configuration files. +# .IP daemon_directory +# The directory for Postfix daemon programs. This directory +# should not be in the command search path of any users. +# .IP command_directory +# The directory for Postfix administrative commands. This +# directory should be in the command search path of administrative users. +# .IP queue_directory +# The directory for Postfix queues. +# .IP data_directory +# The directory for Postfix writable data files (caches, etc.). +# .IP sendmail_path +# The full pathname for the Postfix sendmail command. +# This is the Sendmail-compatible mail posting interface. +# .IP newaliases_path +# The full pathname for the Postfix newaliases command. +# This is the Sendmail-compatible command to build alias databases +# for the Postfix local delivery agent. +# .IP mailq_path +# The full pathname for the Postfix mailq command. +# This is the Sendmail-compatible command to list the mail queue. +# .IP mail_owner +# The owner of the Postfix queue. Its numerical user ID and group ID +# must not be used by any other accounts on the system. +# .IP setgid_group +# The group for mail submission and for queue management commands. +# Its numerical group ID must not be used by any other accounts on the +# system, not even by the mail_owner account. +# .IP html_directory +# The directory for the Postfix HTML files. +# .IP manpage_directory +# The directory for the Postfix on-line manual pages. +# .IP sample_directory +# The directory for the Postfix sample configuration files. +# This feature is obsolete as of Postfix 2.1. +# .IP readme_directory +# The directory for the Postfix README files. +# .IP shlib_directory +# The directory for the Postfix shared-library files, and for +# the Postfix dabatase plugin files with a relative pathname +# in the file dynamicmaps.cf. +# .IP meta_directory +# The directory for non-executable files that are shared +# among multiple Postfix instances, such as postfix-files, +# dynamicmaps.cf, as well as the multi-instance template files +# main.cf.proto and master.cf.proto. +# SEE ALSO +# postfix-install(1) Postfix primary installation script. +# FILES +# $config_directory/main.cf, Postfix installation parameters. +# $meta_directory/postfix-files, installation control file. +# $meta_directory/postfix-files.d/*, optional control files. +# $config_directory/install.cf, obsolete configuration file. +# LICENSE +# .ad +# .fi +# The Secure Mailer license must be distributed with this software. +# AUTHOR(S) +# Wietse Venema +# IBM T.J. Watson Research +# P.O. Box 704 +# Yorktown Heights, NY 10598, USA +# +# Wietse Venema +# Google, Inc. +# 111 8th Avenue +# New York, NY 10011, USA +#-- + +umask 022 + +PATH=/bin:/usr/bin:/usr/sbin:/usr/etc:/sbin:/etc:/usr/contrib/bin:/usr/gnu/bin:/usr/ucb:/usr/bsd +SHELL=/bin/sh +IFS=" +" +BACKUP_IFS="$IFS" +debug=: +#debug=echo +MOST_PARAMETERS="command_directory daemon_directory data_directory + html_directory mail_owner mailq_path manpage_directory + newaliases_path queue_directory readme_directory sample_directory + sendmail_path setgid_group shlib_directory meta_directory" +NON_SHARED="config_directory queue_directory data_directory" + +USAGE="Usage: $0 [name=value] command + create-missing Create missing queue directories. + upgrade-source When installing or upgrading from source code. + upgrade-package When installing or upgrading from pre-built package. + first-install-reminder Remind of mandatory first-time configuration steps. + name=value Specify an installation parameter". + +# Process command-line options and parameter settings. Work around +# brain damaged shells. "IFS=value command" should not make the +# IFS=value setting permanent. But some broken standard allows it. + +create=; set_perms=; upgrade_perms=; upgrade_conf=; first_install_reminder= +obsolete=; keep_list=; + +for arg +do + case $arg in + *[" "]*) echo $0: "Error: argument contains whitespace: '$arg'" + exit 1;; + *=*) IFS= eval $arg; IFS="$BACKUP_IFS";; + create-missing) create=1;; + set-perm*) create=1; set_perms=1;; + upgrade-perm*) create=1; upgrade_perms=1;; + upgrade-conf*) upgrade_conf=1;; + upgrade-source) create=1; upgrade_conf=1; upgrade_perms=1;; + upgrade-package) create=1; upgrade_conf=1; set_perms=1;; + first-install*) first_install_reminder=1;; + *) echo "$0: Error: $USAGE" 1>&2; exit 1;; + esac + shift +done + +# Sanity checks. + +test -n "$create$upgrade_conf$first_install_reminder" || { + echo "$0: Error: $USAGE" 1>&2 + exit 1 +} + +# Bootstrapping problem. + +if [ -n "$command_directory" ] +then + POSTCONF="$command_directory/postconf" +else + POSTCONF="postconf" +fi + +$POSTCONF -d mail_version >/dev/null 2>/dev/null || { + echo $0: Error: no $POSTCONF command found. 1>&2 + echo Re-run this command as $0 command_directory=/some/where. 1>&2 + exit 1 +} + +# Also used to require license etc. files only in the default instance. + +def_config_directory=`$POSTCONF -d -h config_directory` || exit 1 +test -n "$config_directory" || + config_directory="$def_config_directory" + +test -d "$config_directory" || { + echo $0: Error: $config_directory is not a directory. 1>&2 + exit 1 +} + +# If this is a secondary instance, don't touch shared files. +# XXX Solaris does not have "test -e". + +instances=`test ! -f $def_config_directory/main.cf || + $POSTCONF -c $def_config_directory -h multi_instance_directories | + sed 's/,/ /'` || exit 1 + +update_shared_files=1 +for name in $instances +do + case "$name" in + "$def_config_directory") ;; + "$config_directory") update_shared_files=; break;; + esac +done + +test -f $meta_directory/postfix-files || { + echo $0: Error: $meta_directory/postfix-files is not a file. 1>&2 + exit 1 +} + +# SunOS5 fmt(1) truncates lines > 1000 characters. + +fake_fmt() { + sed ' + :top + /^\( *\)\([^ ][^ ]*\) */{ + s//\1\2\ +\1/ + P + D + b top + } + ' | fmt +} + +case `uname -s` in +HP-UX*) FMT=cat;; +SunOS*) FMT=fake_fmt;; + *) FMT=fmt;; +esac + +# If a parameter is not set via the command line or environment, +# try to use settings from installed configuration files. + +# Extract parameter settings from the obsolete install.cf file, as +# a transitional aid. + +grep setgid_group $config_directory/main.cf >/dev/null 2>&1 || { + test -f $config_directory/install.cf && { + for name in sendmail_path newaliases_path mailq_path setgid manpages + do + eval junk=\$$name + case "$junk" in + "") eval unset $name;; + esac + eval : \${$name="\`. $config_directory/install.cf; echo \$$name\`"} \ + || exit 1 + done + : ${setgid_group=$setgid} + : ${manpage_directory=$manpages} + } +} + +# Extract parameter settings from the installed main.cf file. + +test -f $config_directory/main.cf && { + for name in $MOST_PARAMETERS + do + eval junk=\$$name + case "$junk" in + "") eval unset $name;; + esac + eval : \${$name=\`$POSTCONF -c $config_directory -h $name\`} || exit 1 + done +} + +# Sanity checks + +case $manpage_directory in + no) echo $0: Error: manpage_directory no longer accepts \"no\" values. 1>&2 + echo Try again with \"$0 manpage_directory=/pathname ...\". 1>&2; exit 1;; +esac + +case $setgid_group in + no) echo $0: Error: setgid_group no longer accepts \"no\" values. 1>&2 + echo Try again with \"$0 setgid_group=groupname ...\" 1>&2; exit 1;; +esac + +for path in "$daemon_directory" "$command_directory" "$queue_directory" \ + "$sendmail_path" "$newaliases_path" "$mailq_path" "$manpage_directory" \ + "$meta_directory" +do + case "$path" in + /*) ;; + *) echo $0: Error: \"$path\" should be an absolute path name. 1>&2; exit 1;; + esac +done + +for path in "$html_directory" "$readme_directory" "$shlib_directory" +do + case "$path" in + /*) ;; + no) ;; + *) echo $0: Error: \"$path\" should be \"no\" or an absolute path name. 1>&2; exit 1;; + esac +done + +# Find out what parameters were not specified via command line, +# via environment, or via installed configuration files. + +missing= +for name in $MOST_PARAMETERS +do + eval test -n \"\$$name\" || missing="$missing $name" +done + +# All parameters must be specified at this point. + +test -n "$non_interactive" -a -n "$missing" && { + cat <&2 +$0: Error: some required installation parameters are not defined. + +- Either the parameters need to be given in the $config_directory/main.cf +file from a recent Postfix installation, + +- Or the parameters need to be specified through the process +environment. + +- Or the parameters need to be specified as name=value arguments +on the $0 command line, + +The following parameters were missing: + + $missing + +EOF + exit 1 +} + +POSTCONF="$command_directory/postconf" + +# Save settings, allowing command line/environment override. + +# Undo MAIL_VERSION expansion at the end of a parameter value. If +# someone really wants the expanded mail version in main.cf, then +# we're sorry. + +# Confine side effects from mail_version unexpansion within a subshell. + +(case "$mail_version" in +"") mail_version="`$POSTCONF -dhx mail_version`" || exit 1 +esac + +for name in $MOST_PARAMETERS +do + eval junk=\$$name + case "$junk" in + *"$mail_version"*) + case "$pattern" in + "") pattern=`echo "$mail_version" | sed 's/\./\\\\./g'` || exit 1 + esac + val=`echo "$junk" | sed "s/$pattern"'$/${mail_version}/g'` || exit 1 + eval ${name}='"$val"' + esac +done + +# XXX Maybe update main.cf only with first install, upgrade, set +# permissions, and what else? Should there be a warning otherwise? + +override= +for name in $MOST_PARAMETERS +do + eval junk=\"\$$name\" + test "$junk" = "`$POSTCONF -c $config_directory -h $name`" || { + override=1 + break + } +done + +test -n "$override" && { + $POSTCONF -c $config_directory -e \ + "daemon_directory = $daemon_directory" \ + "command_directory = $command_directory" \ + "queue_directory = $queue_directory" \ + "data_directory = $data_directory" \ + "mail_owner = $mail_owner" \ + "setgid_group = $setgid_group" \ + "sendmail_path = $sendmail_path" \ + "mailq_path = $mailq_path" \ + "newaliases_path = $newaliases_path" \ + "html_directory = $html_directory" \ + "manpage_directory = $manpage_directory" \ + "sample_directory = $sample_directory" \ + "readme_directory = $readme_directory" \ + "shlib_directory = $shlib_directory" \ + "meta_directory = $meta_directory" \ + || exit 1 +} || exit 0) || exit 1 + +# Use file/directory status information in $meta_directory/postfix-files. + +test -n "$create" && { + postfix_files_d=$meta_directory/postfix-files.d + for postfix_file in $meta_directory/postfix-files \ + `test -d $postfix_files_d && { find $postfix_files_d -type f | sort; }` + do + exec <$postfix_file || exit 1 + while IFS=: read path type owner group mode flags junk + do + IFS="$BACKUP_IFS" + set_permission= + # Skip comments. Skip shared files, if updating a secondary instance. + case $path in + [$]*) case "$update_shared_files" in + 1) $debug keep non-shared or shared $path;; + *) non_shared= + for name in $NON_SHARED + do + case $path in + "\$$name"*) non_shared=1; break;; + esac + done + case "$non_shared" in + 1) $debug keep non-shared $path;; + *) $debug skip shared $path; continue;; + esac;; + esac;; + *) continue;; + esac + # Skip hard links and symbolic links. + case $type in + [hl]) continue;; + [df]) ;; + *) echo unknown type $type for $path in $postfix_file 1>&2; exit 1;; + esac + # Expand $name, and canonicalize null fields. + for name in path owner group flags + do + eval junk=\${$name} + case $junk in + [$]*) eval $name=$junk;; + -) eval $name=;; + *) ;; + esac + done + # Skip uninstalled files. + case $path in + no|no/*) continue;; + esac + # Pick up the flags. + case $flags in *u*) upgrade_flag=1;; *) upgrade_flag=;; esac + case $flags in *c*) create_flag=1;; *) create_flag=;; esac + case $flags in *r*) recursive="-R";; *) recursive=;; esac + case $flags in *o*) obsolete_flag=1;; *) obsolete_flag=;; esac + case $flags in *[1i]*) test ! -r "$path" -a "$config_directory" != \ + "$def_config_directory" && continue;; esac + # Flag obsolete objects. XXX Solaris 2..9 does not have "test -e". + if [ -n "$obsolete_flag" ] + then + test -r $path -a "$type" != "d" && obsolete="$obsolete $path" + continue; + else + keep_list="$keep_list $path" + fi + # Create missing directories with proper owner/group/mode settings. + if [ -n "$create" -a "$type" = "d" -a -n "$create_flag" -a ! -d "$path" ] + then + mkdir $path || exit 1 + set_permission=1 + # Update all owner/group/mode settings. + elif [ -n "$set_perms" ] + then + set_permission=1 + # Update obsolete owner/group/mode settings. + elif [ -n "$upgrade_perms" -a -n "$upgrade_flag" ] + then + set_permission=1 + fi + test -n "$set_permission" && { + chown $recursive $owner $path || exit 1 + test -z "$group" || chgrp $recursive $group $path || exit 1 + # Don't "chmod -R"; queue file status is encoded in mode bits. + if [ "$type" = "d" -a -n "$recursive" ] + then + find $path -type d -exec chmod $mode "{}" ";" + else + chmod $mode $path + fi || exit 1 + } + done + IFS="$BACKUP_IFS" + done +} + +# Upgrade existing Postfix configuration files if necessary. + +test -n "$upgrade_conf" && { + + # Postfix 2.0. + # Add missing relay service to master.cf. + + grep '^relay' $config_directory/master.cf >/dev/null || { + echo Editing $config_directory/master.cf, adding missing entry for relay service + cat >>$config_directory/master.cf </dev/null || { + echo Editing $config_directory/master.cf, adding missing entry for flush service + cat >>$config_directory/master.cf </dev/null || { + echo Editing $config_directory/master.cf, adding missing entry for trace service + cat >>$config_directory/master.cf </dev/null || { + echo Editing $config_directory/master.cf, adding missing entry for verify service + cat >>$config_directory/master.cf </dev/null && { + echo Editing $config_directory/master.cf, setting verify process limit to 1 + ed $config_directory/master.cf </dev/null && { + echo Editing $config_directory/master.cf, making the pickup service unprivileged + ed $config_directory/master.cf </dev/null && { + echo Editing $config_directory/master.cf, making the $name service public + ed $config_directory/master.cf </dev/null) || missing="$missing defer" + (echo "$found" | grep deferred>/dev/null)|| missing="$missing deferred" + test -n "$missing" && { + echo fixing main.cf hash_queue_names for missing $missing + $POSTCONF -c $config_directory -e hash_queue_names="$found$missing" || + exit 1 + } + + # Turn on safety nets for new features that could bounce mail that + # would be accepted by a previous Postfix version. + + # [The "unknown_local_recipient_reject_code = 450" safety net, + # introduced with Postfix 2.0 and deleted after Postfix 2.3.] + + # Postfix 2.0. + # Add missing proxymap service to master.cf. + + grep '^proxymap.*proxymap' $config_directory/master.cf >/dev/null || { + echo Editing $config_directory/master.cf, adding missing entry for proxymap service + cat >>$config_directory/master.cf </dev/null || { + echo Editing $config_directory/master.cf, adding missing entry for anvil service + cat >>$config_directory/master.cf </dev/null || { + echo Editing $config_directory/master.cf, adding missing entry for scache service + cat >>$config_directory/master.cf </dev/null || { + echo Editing $config_directory/master.cf, adding missing entry for discard service + cat >>$config_directory/master.cf <unix service. + + grep "^tlsmgr[ ]*fifo[ ]" \ + $config_directory/master.cf >/dev/null && { + echo Editing $config_directory/master.cf, updating the tlsmgr from fifo to unix service + ed $config_directory/master.cf </dev/null || { + echo Editing $config_directory/master.cf, adding missing entry for tlsmgr service + cat >>$config_directory/master.cf </dev/null || { + echo Editing $config_directory/master.cf, adding missing entry for retry service + cat >>$config_directory/master.cf </dev/null || { + echo Editing $config_directory/master.cf, adding missing entry for proxywrite service + cat >>$config_directory/master.cf </dev/null && { + echo Editing $config_directory/master.cf, setting proxywrite process limit to 1 + ed $config_directory/master.cf </dev/null || { + echo Editing $config_directory/master.cf, adding missing entry for postscreen TCP service + cat >>$config_directory/master.cf </dev/null || { + echo Editing $config_directory/master.cf, adding missing entry for smtpd unix-domain service + cat >>$config_directory/master.cf </dev/null || { + echo Editing $config_directory/master.cf, adding missing entry for dnsblog unix-domain service + cat >>$config_directory/master.cf </dev/null || { + echo Editing $config_directory/master.cf, adding missing entry for tlsproxy unix-domain service + cat >>$config_directory/master.cf </dev/null || { + echo Editing $config_directory/master.cf, adding missing entry for postlog unix-domain datagram service + cat >>$config_directory/master.cf <&2 + echo Do not run directly. 1>&2 + exit 1 +esac + +LOGGER="$command_directory/postlog -t $MAIL_LOGTAG/postfix-script" +INFO="$LOGGER -p info" +WARN="$LOGGER -p warn" +ERROR="$LOGGER -p error" +FATAL="$LOGGER -p fatal" +PANIC="$LOGGER -p panic" + +umask 022 +SHELL=/bin/sh + +# +# Can't do much without these in place. +# +cd $command_directory || { + $FATAL no Postfix command directory $command_directory! + exit 1 +} +cd $daemon_directory || { + $FATAL no Postfix daemon directory $daemon_directory! + exit 1 +} +test -f master || { + $FATAL no Postfix master program $daemon_directory/master! + exit 1 +} +cd $config_directory || { + $FATAL no Postfix configuration directory $config_directory! + exit 1 +} +case $shlib_directory in +no) ;; + *) cd $shlib_directory || { + $FATAL no Postfix shared-library directory $shlib_directory! + exit 1 + } +esac +cd $meta_directory || { + $FATAL no Postfix meta directory $meta_directory! + exit 1 +} +cd $queue_directory || { + $FATAL no Postfix queue directory $queue_directory! + exit 1 +} +def_config_directory=`$command_directory/postconf -dh config_directory` || { + $FATAL cannot execute $command_directory/postconf! + exit 1 +} + +# If this is a secondary instance, don't touch shared files. + +instances=`test ! -f $def_config_directory/main.cf || + $command_directory/postconf -c $def_config_directory \ + -h multi_instance_directories | sed 's/,/ /'` || { + $FATAL cannot execute $command_directory/postconf! + exit 1 +} + +check_shared_files=1 +for name in $instances +do + case "$name" in + "$def_config_directory") ;; + "$config_directory") check_shared_files=; break;; + esac +done + +# +# Parse JCL +# +case $1 in + +start_msg) + + echo "Start postfix" + ;; + +stop_msg) + + echo "Stop postfix" + ;; + +start|start-fg) + + $daemon_directory/master -t 2>/dev/null || { + $FATAL the Postfix mail system is already running + exit 1 + } + if [ -f $queue_directory/quick-start ] + then + rm -f $queue_directory/quick-start + else + $daemon_directory/postfix-script check-fatal || { + $FATAL Postfix integrity check failed! + exit 1 + } + # Foreground this so it can be stopped. All inodes are cached. + $daemon_directory/postfix-script check-warn + fi + $INFO starting the Postfix mail system || exit 1 + case $1 in + start) + # NOTE: wait in foreground process to get the initialization status. + $daemon_directory/master -w || { + $FATAL "mail system startup failed" + exit 1 + } + ;; + start-fg) + # Foreground start-up is incompatible with multi-instance mode. + # Use "exec $daemon_directory/master" only if PID == 1. + # Otherwise, doing so would break process group management, + # and "postfix stop" would kill too many processes. + case $instances in + "") case $$ in + 1) exec $daemon_directory/master -i + $FATAL "cannot start-fg the master daemon" + exit 1;; + *) $daemon_directory/master -s;; + esac + ;; + *) $FATAL "start-fg does not support multi_instance_directories" + exit 1 + ;; + esac + ;; + esac + ;; + +drain) + + $daemon_directory/master -t 2>/dev/null && { + $FATAL the Postfix mail system is not running + exit 1 + } + $INFO stopping the Postfix mail system + kill -9 `sed 1q pid/master.pid` + ;; + +quick-stop) + + $daemon_directory/postfix-script stop + touch $queue_directory/quick-start + ;; + +stop) + + $daemon_directory/master -t 2>/dev/null && { + $FATAL the Postfix mail system is not running + exit 1 + } + $INFO stopping the Postfix mail system + kill `sed 1q pid/master.pid` + for i in 5 4 3 2 1 + do + $daemon_directory/master -t && exit 0 + $INFO waiting for the Postfix mail system to terminate + sleep 1 + done + $WARN stopping the Postfix mail system with force + pid=`awk '{ print $1; exit 0 } END { exit 1 }' pid/master.pid` && + kill -9 -$pid + ;; + +abort) + + $daemon_directory/master -t 2>/dev/null && { + $FATAL the Postfix mail system is not running + exit 1 + } + $INFO aborting the Postfix mail system + kill `sed 1q pid/master.pid` + ;; + +reload) + + $daemon_directory/master -t 2>/dev/null && { + $FATAL the Postfix mail system is not running + exit 1 + } + $INFO refreshing the Postfix mail system + $command_directory/postsuper active || exit 1 + kill -HUP `sed 1q pid/master.pid` + $command_directory/postsuper & + ;; + +flush) + + cd $queue_directory || { + $FATAL no Postfix queue directory $queue_directory! + exit 1 + } + $command_directory/postqueue -f + ;; + +check) + + $daemon_directory/postfix-script check-fatal || exit 1 + $daemon_directory/postfix-script check-warn + exit 0 + ;; + +status) + + $daemon_directory/master -t 2>/dev/null && { + $INFO the Postfix mail system is not running + exit 1 + } + $INFO the Postfix mail system is running: PID: `sed 1q pid/master.pid` + exit 0 + ;; + + +check-fatal) + # This command is NOT part of the public interface. + + $SHELL $daemon_directory/post-install create-missing || { + $FATAL unable to create missing queue directories + exit 1 + } + + # Look for incomplete installations. + + test -f $config_directory/master.cf || { + $FATAL no $config_directory/master.cf file found + exit 1 + } + + maillog_file=`$command_directory/postconf -h maillog_file` || { + $FATAL cannot execute $command_directory/postconf! + exit 1 + } + test -n "$maillog_file" && { + $command_directory/postconf -M postlog/unix-dgram 2>/dev/null \ + | grep . >/dev/null || { + $FATAL "missing 'postlog' service in master.cf - run 'postfix upgrade-configuration'" + exit 1 + } + } + + # See if all queue files are in the right place. This is slow. + # We must scan all queues for mis-named queue files before the + # mail system can run. + + $command_directory/postsuper || exit 1 + exit 0 + ;; + +check-warn) + # This command is NOT part of the public interface. + + # Check Postfix root-owned directory owner/permissions. + + find $queue_directory/. $queue_directory/pid \ + -prune ! -user root \ + -exec $WARN not owned by root: {} \; + + find $queue_directory/. $queue_directory/pid \ + -prune \( -perm -020 -o -perm -002 \) \ + -exec $WARN group or other writable: {} \; + + # Check Postfix root-owned directory tree owner/permissions. + + todo="$config_directory/." + test -n "$check_shared_files" && { + todo="$daemon_directory/. $meta_directory/. $todo" + test "$shlib_directory" = "no" || + todo="$shlib_directory/. $todo" + } + todo=`echo "$todo" | tr ' ' '\12' | sort -u` + + find $todo ! -user root \ + -exec $WARN not owned by root: {} \; + + # Handle symlinks separately + find -L $todo \( -perm -020 -o -perm -002 \) \ + -exec $WARN group or other writable: {} \; + + find $todo -type l | while read f; do \ + # makedefs out known to be a symlink and OK + if [ "$f" != "/etc/postfix/./makedefs.out" ]; then \ + readlink "$f" | grep -q / && $WARN symlink leaves directory: "$f"; \ + fi \ + done; \ + + # Check Postfix mail_owner-owned directory tree owner/permissions. + + find $data_directory/. ! -user $mail_owner \ + -exec $WARN not owned by $mail_owner: {} \; + + find $data_directory/. \( -perm -020 -o -perm -002 \) \ + -exec $WARN group or other writable: {} \; + + # Check Postfix mail_owner-owned directory tree owner. + + find `ls -d $queue_directory/* | \ + egrep '/(saved|incoming|active|defer|deferred|bounce|hold|trace|corrupt|public|private|flush)$'` \ + ! \( -type p -o -type s \) ! -user $mail_owner \ + -exec $WARN not owned by $mail_owner: {} \; + + # WARNING: this should not descend into the maildrop directory. + # maildrop is the least trusted Postfix directory. + + find $queue_directory/maildrop -prune ! -user $mail_owner \ + -exec $WARN not owned by $mail_owner: $queue_directory/maildrop \; + + # Check Postfix setgid_group-owned directory and file group/permissions. + + todo="$queue_directory/public $queue_directory/maildrop" + test -n "$check_shared_files" && + todo="$command_directory/postqueue $command_directory/postdrop $todo" + + find $todo \ + -prune ! -group $setgid_group \ + -exec $WARN not owned by group $setgid_group: {} \; + + test -n "$check_shared_files" && + find $command_directory/postqueue $command_directory/postdrop \ + -prune ! -perm -02111 \ + -exec $WARN not set-gid or not owner+group+world executable: {} \; + + # Check non-Postfix root-owned directory tree owner/content. + + for dir in bin etc lib sbin usr + do + test -d $dir && { + find $dir ! -user root \ + -exec $WARN not owned by root: $queue_directory/{} \; + + find $dir -type f -print | while read path + do + test -f /$path && { + cmp -s $path /$path || + $WARN $queue_directory/$path and /$path differ + } + done + } + done + + find corrupt -type f -exec $WARN damaged message: {} \; + + # Check for non-Postfix MTA remnants. + + test -n "$check_shared_files" -a -f /usr/sbin/sendmail -a \ + -f /usr/lib/sendmail && { + cmp -s /usr/sbin/sendmail /usr/lib/sendmail || { + $WARN /usr/lib/sendmail and /usr/sbin/sendmail differ + $WARN Replace one by a symbolic link to the other + } + } + exit 0 + ;; + +set-permissions|upgrade-configuration) + $daemon_directory/post-install create-missing "$@" + ;; + +post-install) + # Currently not part of the public interface. + shift + $daemon_directory/post-install "$@" + ;; + +tls) + shift + $daemon_directory/postfix-tls-script "$@" + ;; + +/*) + # Currently not part of the public interface. + "$@" + ;; + +logrotate) + case $# in + 1) ;; + *) $FATAL "usage postfix $1 (no arguments)"; exit 1;; + esac + for name in maillog_file maillog_file_compressor \ + maillog_file_rotate_suffix + do + value="`$command_directory/postconf -h $name`" + case "$value" in + "") $FATAL "empty '$name' parameter value - logfile rotation failed" + exit 1;; + esac + eval $name='"$value"'; + done + + case "$maillog_file" in + /dev/*) $FATAL "not rotating '$maillog_file'"; exit 1;; + esac + + errors=`( + suffix="\`date +$maillog_file_rotate_suffix\`" || exit 1 + mv "$maillog_file" "$maillog_file.$suffix" || exit 1 + $daemon_directory/master -t 2>/dev/null || + kill -HUP \`sed 1q pid/master.pid\` || exit 1 + sleep 1 + "$maillog_file_compressor" "$maillog_file.$suffix" || exit 1 + ) 2>&1` || { + $FATAL "logfile '$maillog_file' rotation failed: $errors" + exit 1 + } + ;; + +*) + $FATAL "unknown command: '$1'. Usage: postfix start (or stop, reload, abort, flush, check, status, set-permissions, upgrade-configuration, logrotate)" + exit 1 + ;; + +esac diff --git a/postfix/virtual b/postfix/virtual new file mode 100644 index 0000000..2a19c6a --- /dev/null +++ b/postfix/virtual @@ -0,0 +1 @@ +postmaster@toetersnoet.nl toetersnoet diff --git a/postfix/virtual-alias-maps.conf b/postfix/virtual-alias-maps.conf new file mode 100644 index 0000000..0e24a4a --- /dev/null +++ b/postfix/virtual-alias-maps.conf @@ -0,0 +1,5 @@ +user = virtualmail +password = nusif78yadkasc8ujieaw89y +hosts = 127.0.0.1 +dbname = mailserver +query = select distinct destination from vw_aliases where source='%s' or source = '@%d' and not EXISTS(select email from vw_mailboxes where email = '%s') union ALL select email as destination from vw_mailboxes where email = '%s' diff --git a/postfix/virtual-canonical-maps.conf b/postfix/virtual-canonical-maps.conf new file mode 100644 index 0000000..313a8d7 --- /dev/null +++ b/postfix/virtual-canonical-maps.conf @@ -0,0 +1,5 @@ +user = virtualmail +password = nusif78yadkasc8ujieaw89y +hosts = 127.0.0.1 +dbname = mailserver +query = SELECT destination, source FROM `vw_aliases` where SUBSTRING_INDEX(destination,'@',-1) not in(select domainName from domains) and source = '%s' diff --git a/postfix/virtual-mailbox-domains.conf b/postfix/virtual-mailbox-domains.conf new file mode 100644 index 0000000..85e8b22 --- /dev/null +++ b/postfix/virtual-mailbox-domains.conf @@ -0,0 +1,5 @@ +user = virtualmail +password = nusif78yadkasc8ujieaw89y +hosts = 127.0.0.1 +dbname = mailserver +query = SELECT domainName FROM domains WHERE DomainName ='%s' diff --git a/postfix/virtual-mailbox-senders.conf b/postfix/virtual-mailbox-senders.conf new file mode 100644 index 0000000..829a29b --- /dev/null +++ b/postfix/virtual-mailbox-senders.conf @@ -0,0 +1,5 @@ +user = virtualmail +password = nusif78yadkasc8ujieaw89y +hosts = 127.0.0.1 +dbname = mailserver +query = SELECT Email as mail FROM vw_mailboxes WHERE Email='%s' diff --git a/postfix/virtual-mailbox-users.conf b/postfix/virtual-mailbox-users.conf new file mode 100644 index 0000000..d38efbb --- /dev/null +++ b/postfix/virtual-mailbox-users.conf @@ -0,0 +1,5 @@ +user = virtualmail +password = nusif78yadkasc8ujieaw89y +hosts = 127.0.0.1 +dbname = mailserver +query = SELECT mailPathRel FROM vw_mailboxes WHERE Email='%s' diff --git a/postfix/virtual.db b/postfix/virtual.db new file mode 100644 index 0000000..a685304 Binary files /dev/null and b/postfix/virtual.db differ diff --git a/postfix/vmailbox b/postfix/vmailbox new file mode 100644 index 0000000..c568fdb --- /dev/null +++ b/postfix/vmailbox @@ -0,0 +1,3 @@ +job@toetersnoet.nl toetersnoet.nl/job/ +test@toetersnoet.nl toetersnoet.nl/test/ +bianca@toetersnoet.nl toetersnoet.nl/bianca/ diff --git a/postfix/vmailbox.db b/postfix/vmailbox.db new file mode 100644 index 0000000..020afe5 Binary files /dev/null and b/postfix/vmailbox.db differ